- Home
- Our Work
- Resources
- Research Grants
- Building Information Modeling
- Architectural Precast
- General
- Masonry
- 01-14 Building Information Modeling for Masonry Phase 2 Project; BIM for Masonry Benchmark
- 02-15 Building Information Modeling for Masonry Phase II/III Project; Masonry Wall Model Definition
- 03-13 Building Information Modeling for Masonry Phase 2 Project; Masonry Unit Model Definition
- 08-16 Building Information Modeling for Masonry Phase III Project Technical Oversight for the Commercialization of the Masonry Unit Database
- Planning
- Precast Concrete
- Structural Concrete
- 06-07 Development of Industry Foundation Classes (IFCs) for Structural Components
- 01-10 Development of Strategic Plan for IFCs for Structural Concrete Components
- 02-13 Cast-in-Place Concrete National BIM Standard Phase Two: Model View Definition
- 03-12 Cast-in-Place Concrete National BIM Standard Phase One: Information Delivery Manual
- Concrete
- High-Strength Rebar
- 04-13 Assessment of Yield Stress Measurement Methods for Reinforcing Bars
- 01-13 The Impact of High-Strength Reinforcing Steel on Current Design Practice
- 05-13 The Development Of A Roadmap On The Use Of High- Strength Reinforcement In Reinforced Concrete Design
- 03-14 Development of Tentative Specification for High-Strength Steel Reinforcing Bar
- 05-14 Defining Structurally Acceptable Properties of High-Strength Steel Bars through Material and Column Testing
- 08-11 Anchorage of High-Strength Reinforcing Bars
- 01-15 Setting Bar-Bending Requirements for High-Strength Steel Bars
- 04-14 Performance Characterization of Beams with High-Strength Reinforcement
- 06-14 High-Strength Steel Bars in Reinforced Concrete Walls: Influence of Mechanical Properties of Steel on Deformation Capacity
- 02-16 Low-Cycle Fatigue Criteria for the Seismic Design of Concrete Structures with High Strength Reinforcing Steel
- 03-16 Acceptable Elongations and Low-Cycle Fatigue Performance for High-Strength Reinforcing Bars
- 03-17 Reinforced Concrete Coupling Beams with High-Strength Steel Bars
- 02-17 Development and Splice Lengths for High-Strength Reinforcement
- 05-18 Development of Large High-Strength Headed Reinforcing Bars
- 02-19 Normal- and High-Strength Continuously Wound Ties
- 01-19 Foundation Mats with High Strength Steel Reinforcement
- 03-22 Design Requirements for Mechanically Spliced High-Strength Reinforcing Bars in Hinge Regions
- Miscellaneous
- 01-07 Improved Tolerance Management in Concrete Construction
- 07-11 Effect of Shear Stud Layout on the Seismic Behavior of Slab-Column Connections
- 04-11 Tensile Capacity of Braced Frame Anchor Bolt Groups
- 06-11 Continuous Stirrups for Shear and Torsion Reinforcement in Beams
- 02-08 Large-Scale Testing of Reinforced Concrete Coupling Beams with Embedded Structural Steel Sections
- 02-10 Beam Hoop Reinforcement for Large Beams in Special Moment Resisting Frames
- 04-06 Reinforced Concrete Link Beams
- 02-14 Linking Concrete Tensile Performance and Seismic Response of Fiber Reinforced Concrete Coupling Beam
- 03-10 Post-Tensioned Cast-in-Place Concrete Walls for Seismic Resistance
- Precast
- 03-19 Seismic Precast Concrete Wall and Frame Structures with Short-Grouted Ductile Rebar Connections
- 02-06 Development and Design of Untopped Precast Concrete Diaphragm Systems for High Seismic Zones
- 08-07 Development and Design of Untopped Precast Concrete Diaphragm Systems for High Seismic Zones (Extension)
- 09-06 Adaptations of Cementitious Structural Panels for Multistory Construction
- 03-08 Hybrid Precast Wall Systems for Seismic Regions
- 06-13 Opportunities for Investigating Precast Concrete System via NEESR Shake Table Tests
- High-Strength Rebar
- Construction Means and Methods
- Exterior Wall Systems
- Performance-Based Design
- 05-24 Parking Garage Live Loads for Electric Vehicles
- Fire
- Seismic
- 01-16 Update To Performance-Based Seismic Design Guidelines for Tall Buildings
- 06-17 FEMA P695 Study - "Enhanced Ductility" RC Coupled Wall Systems
- 11-06 Design Procedure for Thin Shear Walls in High Seismic Zones
- 03-07 Guidelines to Performance-Based Seismic Design of Tall Buildings
- 03-09 Performance-Based Seismic Design of Concrete Walls
- Wind
- 06-19 Nonlinear Wind Design of Steel Reinforced Concrete (SRC) Coupling Beams
- 05-19 Steel Coupling Beams in Low-Seismic and Wind Applications
- 01-18 Pre-Standard for Performance-Based Design for Wind
- 04-19 Determination of Pressure Coefficients for High Rise Buildings of Different Aspect Ratios
- 01-21 Performance and Repair of Ordinary Structural Walls Subjected to Wind and Seismic Loading Protocols
- 06-25 Assessment of Connection Capacity in support of PBWD
- Project Delivery
- Design Build
- 03-21 Expanded Guides to Managing the Design Phase of Design-Build Projects
- 04-21 Expanded Guides to Managing the Design Phase of Design-Build Projects
- 05-21 Expanded Guides to Managing the Design Phase of Design-Build Projects
- 02-24 Progressive Design-Build Implementation
- 03-24 Owner Readiness Assessment for Design-Build Projects
- 04-24 Owner Readiness Assessment for Design-Build Projects
- 04-25 Design Management Course Update
- General
- Innovation Adoption
- Integrated
- Design Build
- Steel
- General/Miscellaneous
- SpeedCore
- 06-06 Design Procedure for Dual-Plate Composite Shear Walls
- 05-17 R-Factors for Coupled Composite Plate Shear Walls-Concrete Filled (Coupled-CPSW/CF)
- 03-18 Performance-Based Structural Fire Engineering of Buildings with Concrete-Filled Composite Plate Shear Walls (CF-CPSW)
- 03-20 Composite Floor-to-SpeedCore Wall Systems: Performance-Based Fire Resistance and Design
- 06-16 Seismic and Wind Behavior and Design of Coupled CF-CPSW Core Walls for Steel Buildings
- 02-21 Bolted splice details for Composite Plate Shear Walls—Concrete Filled (SpeedCore)
- 26-2 Seismic and Wind Performance and Design of Concrete-Filled Composite Moment-Resisting Frames (SpeedFrame)
- FastFloor
- Sustainability
- Carbon Reduction
- 05-07 CSI GreenFormat Sustainable Product Reporting Guide
- 05-11 Users' Guide to "Green" Concrete in Building Construction
- 04-16 Life Cycle Assessment (LCA) for Low Carbon Construction
- 06-18 Embodied Carbon in Construction Calculator
- 06-22 Assembly Live Load Consistency for Buildings: Gateway to Reducing Embedded Energy
- 03-25 Code Updates for Reduction of Embodied-carbon
- Water Reuse
- Carbon Reduction
- Mass Timber
- Building Information Modeling
- Case Studies
- Embodied Carbon in Construction Calculator (EC3)
- Professional's Guide to Managing the Design Phase of a Design-Build Project
- Tall Building Initiative: Guidelines for Performance-Based Seismic Design of Tall Buildings
- SpeedCore: Rethinking How High-Rise Buildings are Designed and Built
- Modernizing Building Codes for Wind
- Establishing Building Code Requirements for High-Strength Reinforcing Steel
- Prestandard for Performance-Based Wind Design
- Performance-Based Structural Fire Design
- On-Site Non-Potable Water Reuse Guide
- Steel Fiber Reinforced Coupling Beams
- Case For Support | The Charles Pankow Foundation
- Annual Reports
- Collaboration is the Key to Innovation
- Join Us
- About
- Contact Us
- WHAT'S NEW
- FINAL REPORT (Phase 1) CURE - Code Updates for Reduction of Embodied-carbon
- FINAL REPORT: Performance and Repair of Ordinary Structural Walls Subjected to Wind and Seismic Loading Protocols (RGA 1-21)
- FINAL REPORT: Progressive Design-Build Implementation (A Pankow-ACEC Research Institute-DBIA Partnership)(RGA 2-24)
- 2025 Annual Report
- RESEARCH GRANT AWARD (RGA) 26-2: Seismic and Wind Performance and Design of Concrete-Filled Composite Moment-Resisting Frames (SpeedFrame)
- RESEARCH GRANT AWARD (RGA) 26-1: Behavior of Modular Steel Plate Floor Assemblies (FastFloor Phase 4)
- MBMA Award Winner!
- FINAL REPORT: Seismic Precast Concrete Wall and Frame Structures with Short-Grouted Ductile Rebar Connections (RGA 3-19)
- FINAL REPORT: Safe and Sustainable Parking Garage Live Loads in the Age of the Electric Vehicle (RGA #05-24)
- News release: Glenn Bell delivers IStructE Gold Medal address
- FINAL REPORT: Design Requirements for Mechanically Spliced High-Strength Reinforcing Bars in Hinge Regions (RGA 3-22)
- RESEARCH GRANT AWARD RGA #06-25: Assessment of Connection Capacity in support of PBWD
- FINAL REPORT: Project Bolted Splice Details for Composite Plate Shear Walls—Concrete Filled (RGA #02-21)
- RESEARCH GRANT AWARD RGA #04-25 - Design Integration Management Course Update
- RESEARCH GRANT AWARD RGA #03-25 - Code Updates for Reduction of Embodied-carbon (CURE)
- FINAL REPORT: One-Way Shear Strength of Large Beams and Foundation Elements Containing High-Strength Longitudinal Reinforcement (RGA #01-19)
- 2024 Annual Report
- Congratulations to Ron Klemencic!
- RESEARCH GRANT AWARD: RGA #01-25 - Behavior of Modular Steel Plate Floor Assemblies (FastFloor Phase 3)
- RESEARCH COMPLETION: Seismic and Wind Behavior and Design of Coupled CF-CPSW Core Walls for Steel Buildings (RGA #06-16)
- RESEARCH GRANT AWARD #02-25: Advancing Building Code Requirements for Resilient Design for Functional Recovery
- NEW FOUNDATION VIDEO FOR 2025!
- RESEARCH GRANT AWARD #05-24: Safe and Sustainable Parking Garage Live Loads In The Age Of The Electric Vehicle
- RESEARCH GRANT AWARD #04-24: Owner Readiness Assessment for Design-Build Projects
- RESEARCH GRANT AWARD #03-24: Owner Readiness Assessment for Design-Build Projects
- RESEARCH COMPLETION: RGA #02-21 Project Bolted Splice Details for Composite Plate Shear Walls—Concrete Filled
- PHASE 1 COMPLETION: RGA #01-22 Behavior of Modular Steel Plate Floor Assemblies "FastFloor"
- MARKET SECTOR PLAYBOOKS: Expanded Guides to Managing the Design Phase of Design-Build Projects
- ANNUAL REPORT 2023: Co-Funding Fuels Innovation To New Heights
- RESEARCH GRANT AWARD #02-24: A Guide to Equitable Risk Allocation in Design-Build Projects (A Pankow-ACEC Research Institute-DBIA Partnership)
- RESEARCH GRANT: Improving the Safety of Rebar Cages using Innovative Connectors Phase 2: Failure Prevention of Below and Above Ground Rebar Cages (RGA #01-24)
- NEW RESEARCH REPORT: Introduction to Performance-Based Structural Fire Design (PBSFD) for Authority Having Jurisdiction (AHJ) Officials
- Congratulations to our former Executive Director!!
- REMEMBERING THIS DATE: Charles J Pankow Jr. (October 6, 1923 - January 12, 2004)
- NEW RESEARCH REPORT: Steel Coupling Beams in Low-Seismic and Wind Applications
- NEW PUBLICATION: The Design-Builder’s Guide to Design Management
- RESEARCH GRANT AWARD: RGA #03-23 - Behavior of Modular Steel Plate Floor Assemblies (FastFloor Phase 2)
- NEW RESEARCH REPORT: RGA #01-20 Improving the Safety of Rebar Cages by Using Innovative Connectors
- RESEARCH GRANT AWARD: RGA #04-23 - Steel / Mass Timber Hybrid Diaphragms and Vibration
- REPORT ANNOUNCEMENT: RGA #06-22, Live Load Research
- RESEARCH GRANT AWARD: RGA #02-23 - FEMA P695 Study on Post-tensioned Mass Timber Rocking Wall Lateral Systems
- INNOVATIVE TOOL FOR OWNERS! Owner Typology Assessment and Project Delivery Method Considerations
- NEW RESEARCH REPORT: Development of Large High-Strength Headed Reinforcing Bars
- RESEARCH GRANT AWARD: RGA #01-23 Thermal Performance of Spandrel Assemblies in Glazing Systems, Phase 2
- RESEARCH GRANT UPDATE: RGA #06-22 Live Load Research - June 2023
- Charles Pankow Foundation Appoints New Executive Director
- NEW RESEARCH PRODUCT: RGA #06-19 Nonlinear Wind Design of Steel Reinforced Concrete (SRC) Coupling Beams: Design Recommendations
- Catriona Winter Joins Charles Pankow Foundation Board of Directors
- Laura Stagner Joins Charles Pankow Foundation Board of Directors
- Charles Pankow Foundation Board of Directors Welcomes Emily Guglielmo
- NEW RESEARCH REPORT: Normal and High-Strength Continuously Wound Ties
- RESEARCH GRANT AWARD: Thermal Performance of Spandrel Assemblies in Glazing Systems Research Roadmap, Phase 1
- RESEARCH GRANT AWARD: Design Requirements for Mechanically Spliced High-Strength Reinforcing Bars in Hinge Regions
- ANNUAL REPORT 2021: EXPANDING OUR UNIVERSE
- RESEARCH GRANT AWARD: Innovative Tool for Owners - Owner Typology Assessment and Project Delivery Method Considerations
- RESEARCH GRANT AWARD: Modular Steel Plate Floor Assemblies
- RESEARCH GRANT AWARDS: Expanded Guides to Managing the Design Phase of Design-Build Projects
- JOIN IN OUR WEBSITE SCAVENGER HUNT
- SpeedCore Research Bolted Splice Details for Composite Plate Shear Walls—Concrete Filled
- Thick Foundation Element Blind Prediction Contest 2021
- PERFORMANCE AND REPAIR OF ORDINARY STRUCTURAL WALLS SUBJECTED TO WIND AND SEISMIC LOADING PROTOCOLS
- ACI Honorary Member
- COMPOSITE FLOOR-TO-SPEEDCORE WALL SYSTEMS: PERFORMANCE-BASED FIRE RESISTANCE AND DESIGN
- 2020: A YEAR LIKE NO OTHER
- MAKING AN INDUSTRY IMPACT
- FORMER FOUNDATION LEADER NAMED AMERICAN CONCRETE INSTITUTE HONORARY MEMBER
- Performance-Based Structural Fire Design: Exemplar Designs of Four Regionally Diverse Buildings using ASCE 7-16, Appendix E
- FOUNDATION DIRECTOR GLENN BELL ENR 2019 TOP 25 NEWSMAKER
- WAYFINDING THROUGH THE BUILDING INNOVATION MAZE
- NEW DELIVERABLE - High-Strength Reinforcement for Concrete: Development Length and Lap Splices
- NEW VIDEOS - Structural Fire Engineering and Design of Filled Composite Plate Shear Walls (SpeedCore)
- Determination of Pressure Coefficients for High-Rise Buildings of Different Aspect Ratios
- Reinforced Concrete Coupling Beams with High-Strength Steel Bars
- Construction Industry Validation of Schedule Performance Measure
- New Research Grant Awards: Closing the Guidance Gaps on Coupling Beams Used in Core Wall Systems Subjected to Wind Events
- Two Industry Leaders Join the Board of the Charles Pankow Foundation
- Enhanced Insights on High-Strength Reinforcing Bars
- The Carbon Leadership Forum, in partnership with more than 30 industry leaders, announces breakthrough tool to easily evaluate carbon emissions of building materials
- NEW FOR THE INDUSTRY: PRESTANDARD FOR PERFORMANCE-BASED WIND DESIGN
- NEW RESEARCH REPORT PROVIDES ENHANCED INSIGHTS ON NEWLY DEFINED LATERAL-FORCE RESISTING SYSTEM
- NEW RESEARCH REPORT AIDS DESIGN OF EFFICIENT SEISMIC FORCE-RESISTING SYSTEM FOR BUILDINGS
- ADVANCING WIND DESIGN FOR HIGH-RISE BUILDINGS
- Change and Changemakers
- Announcing our New Executive Director
- Announcing a New Research Grant: Fire Engineering - Concrete-Filled Composite Plate Shear Walls (CF-CPSW)
- Life Cycle Assessment of Buildings: A Practice Guide Now Available
- The Charles Pankow Foundation is Pleased to Announce a Research Grant with UCLA
- Announcing a New Research Grant with the University of Colorado
- Announcing New Research Products Related to a Previous Research Project Co-Sponsored by the Charles Pankow Foundation
- Announcing a New Research Product The Onsite Non-Potable Water Reuse Practice Guide
- Announcing a New Research Product: Performance Characterization of Beams with High-Strength Reinforcement
- Announcing a New Research Product: High-Strength Steel Bars in Reinforced Concrete Walls
- Categories
- Donate
- Privacy Policy
- Site Map